Datalogic BT-47 3.6V 3250mAh Replacement Battery for Datalogic GM4500 GBT4500

This is a rechargeable Datalogic 3.6V 3250mAh BT-47 Battery . High quality and long lifetime, this BT-47 battery lets you work seamlessly when you are on the move for business trips or vacations. All our Li-ion replacement batteries for Datalogic BT-47 Scanner have been tested and proven to match and/or exceed original battery performance and are 100% compatible with Original Manufacturer Specifications. Every piece of our replacement battery for Datalogic BT-47 has been tested and validated on Datalogic systems to ensure the safety for your Datalogic GM4500 GBT4500. Increased capacity extends your workable hours at the office, in meetings or classes, or while traveling.

BT-47 Replacement Datalogic BT-47 3.6V 3250mAh Battery. Buy cheap Datalogic BT-47 Replacement Battery from batteriestore.co.uk now. We have a strict testing process to ensure that your ordered products (like this battery for Datalogic BT-47) are functionally correct before they are packed and sent to you. And before placing an order please make sure that your old original Datalogic BT-47 battery’s shape is same to our batteries’ images as below. Free shipping and one year warranty!

Datalogic BT-47 3.6V 3250mAh Replacement Battery

Product Description:

Type :Li-ion
Brand : Datalogic
Voltage : 3.6V
Capacity :3250mAh

TOP REASONS TO BUY FROM US

✔ Quality replacement battery with high Capacity
✔ Longer lifespan – thanks to modern Lithium technology without memory effect.
✔ Guaranteed safety: Protected against Short-circuits, Overheating and Overvoltage
✔ Each cell is separately tested in order to ensure professional standards are met.
✔ 100% compatible in replacing your original battery

Compatible Part Numbers:

BT-47

Compatibile con i seguenti apparecchi :

for Datalogic GM4500 GBT4500

How to care for your BT-47 battery.

This is the Replacement Datalogic BT-47 Battery, You can extend the life of your BT-47 battery significantly through the proper care and handling of your battery.

  • Any new BT-47 battery should first be fully charged by leaving it plugged in overnight. Once a computer battery is fully charged it will no longer accept any more power. It is a common practice to leave Scanners plugged in after they have been turned off so that the battery has a full charge the next time you use your Scanner. It is probably fully charged within 5 hours.
  • A brand new BT-47 Scanner battery is in a weakened condition since it has not been conditioned yet. Condition and break in your new battery by performing 5 partial discharge and recharge cycles the first week you receive your new battery.
  • Run on battery power without the AC adapter cord at least once a week to keep the BT-47 battery cells active and at their peak potential. When your Scanner is plugged into the power adapter the battery goes to ‘standby mode’ while your Scanner runs directly on electricity from the wall outlet.
  • Even though your battery indicates it is fully charged, your battery will return to a weakened state again in a few months if it does not get some exercise through partial discharge and recharge cycles while running on battery power alone.
  • If your BT-47 battery has not been actively used 2 months or more, condition your battery again with 5 partial discharge & recharge cycles to increase the batteries capacity and run time.
  • Don’t run your battery all the way to empty. Your battery will have a longer service life if it receives shallow discharge and recharge cycles. Research has shown that the useful life of the battery will be much longer if you begin to recharge the battery any time before reaching 20% of the remaining power capacity. Recharging the BT-47 battery even after 10 minutes will not reduce the battery’s life span as lithium batteries do not have the memory effect which was found in older NiCad battery technology. NiCad batteries have never been used in Scanners, even the earliest models.
  • Never run your battery below the 2% critically low warning point. If your battery is run below this point it may not have enough energy to even recharge. This may effectively ‘kill’ your BT-47 battery.

How can I extend your battery run time?

You can extend your BT-47 battery run time by minimizing the power drain on your battery. A 3 cell battery will run approximately 2 to 2-1/2 hours when the battery is new. Even longer times can be achieved by minimizing the power consumption of your laptop. Here are the top ways to reduce your power consumption.

  • Avoid using the CD or DVD drive as the motor consumes a fair amount of power.
  • Turn off your wireless finder if you are not using the internet.
  • Remove any devices plugged into your USB ports or other ports.
  • Close out programs you are not using. By minimizing the load on your CPU, sometimes you can avoid having the cooling fan turn to its high speed mode.
  • Increase your memory to 4 Gigabytes. This creates less work for your hard drive. Data is temporarily written to your hard drive when your memory is not sufficient to hold all the data on the many pages you may be accessing.
  • Reduce the brightness of your laptop screen. This is the number one drain on your battery by far.

Prodotti popolari

Datalogic BTDL35 3.8V 3980mAh Replacement Battery for Datalogic Memor 10 DM88

This is a rechargeable Datalogic 3.8V 3980mAh BTDL35 Battery . High quality and long lifetime, this BTDL35 battery lets you work seamlessly when you are on the move for business trips or vacations. All our Li-ion replacement batteries for Datalogic BTDL35 Scanner have been tested and proven to match and/or exceed original battery performance and are 100% compatible with Original Manufacturer Specifications. Every piece of our replacement battery for Datalogic BTDL35 has been tested and validated on Datalogic systems to ensure the safety for your Datalogic Memor 10 DM88. Increased capacity extends your workable hours at the office, in meetings or classes, or while traveling.

BTDL35 Replacement Datalogic BTDL35 3.8V 3980mAh Battery. Buy cheap Datalogic BTDL35 Replacement Battery from batteriestore.co.uk now. We have a strict testing process to ensure that your ordered products (like this battery for Datalogic BTDL35) are functionally correct before they are packed and sent to you. And before placing an order please make sure that your old original Datalogic BTDL35 battery’s shape is same to our batteries’ images as below. Free shipping and one year warranty!

Datalogic BTDL35 3.8V 3980mAh Replacement Battery

Product Description:

Type :Li-Polymer
Brand : Datalogic
Voltage : 3.8V
Capacity :3980mAh

TOP REASONS TO BUY FROM US

✔ Quality replacement battery with high Capacity
✔ Longer lifespan – thanks to modern Lithium technology without memory effect.
✔ Guaranteed safety: Protected against Short-circuits, Overheating and Overvoltage
✔ Each cell is separately tested in order to ensure professional standards are met.
✔ 100% compatible in replacing your original battery

Compatible Part Numbers:

BTDL35

Compatibile con i seguenti apparecchi :

for Datalogic Memor 10 DM88

How to care for your BTDL35 battery.

This is the Replacement Datalogic BTDL35 Battery, You can extend the life of your BTDL35 battery significantly through the proper care and handling of your battery.

  • Any new BTDL35 battery should first be fully charged by leaving it plugged in overnight. Once a computer battery is fully charged it will no longer accept any more power. It is a common practice to leave Scanners plugged in after they have been turned off so that the battery has a full charge the next time you use your Scanner. It is probably fully charged within 5 hours.
  • A brand new BTDL35 Scanner battery is in a weakened condition since it has not been conditioned yet. Condition and break in your new battery by performing 5 partial discharge and recharge cycles the first week you receive your new battery.
  • Run on battery power without the AC adapter cord at least once a week to keep the BTDL35 battery cells active and at their peak potential. When your Scanner is plugged into the power adapter the battery goes to ‘standby mode’ while your Scanner runs directly on electricity from the wall outlet.
  • Even though your battery indicates it is fully charged, your battery will return to a weakened state again in a few months if it does not get some exercise through partial discharge and recharge cycles while running on battery power alone.
  • If your BTDL35 battery has not been actively used 2 months or more, condition your battery again with 5 partial discharge & recharge cycles to increase the batteries capacity and run time.
  • Don’t run your battery all the way to empty. Your battery will have a longer service life if it receives shallow discharge and recharge cycles. Research has shown that the useful life of the battery will be much longer if you begin to recharge the battery any time before reaching 20% of the remaining power capacity. Recharging the BTDL35 battery even after 10 minutes will not reduce the battery’s life span as lithium batteries do not have the memory effect which was found in older NiCad battery technology. NiCad batteries have never been used in Scanners, even the earliest models.
  • Never run your battery below the 2% critically low warning point. If your battery is run below this point it may not have enough energy to even recharge. This may effectively ‘kill’ your BTDL35 battery.

How can I extend your battery run time?

You can extend your BTDL35 battery run time by minimizing the power drain on your battery. A 3 cell battery will run approximately 2 to 2-1/2 hours when the battery is new. Even longer times can be achieved by minimizing the power consumption of your laptop. Here are the top ways to reduce your power consumption.

  • Avoid using the CD or DVD drive as the motor consumes a fair amount of power.
  • Turn off your wireless finder if you are not using the internet.
  • Remove any devices plugged into your USB ports or other ports.
  • Close out programs you are not using. By minimizing the load on your CPU, sometimes you can avoid having the cooling fan turn to its high speed mode.
  • Increase your memory to 4 Gigabytes. This creates less work for your hard drive. Data is temporarily written to your hard drive when your memory is not sufficient to hold all the data on the many pages you may be accessing.
  • Reduce the brightness of your laptop screen. This is the number one drain on your battery by far.

Prodotti popolari

Datalogic NBL3600 3.7V 2600mAh Replacement Battery for Datalogic HD60

This is a rechargeable Datalogic 3.7V 2600mAh NBL3600 Battery . High quality and long lifetime, this NBL3600 battery lets you work seamlessly when you are on the move for business trips or vacations. All our Li-ion replacement batteries for Datalogic NBL3600 Scanner have been tested and proven to match and/or exceed original battery performance and are 100% compatible with Original Manufacturer Specifications. Every piece of our replacement battery for Datalogic NBL3600 has been tested and validated on Datalogic systems to ensure the safety for your Datalogic HD60. Increased capacity extends your workable hours at the office, in meetings or classes, or while traveling.

NBL3600 Replacement Datalogic NBL3600 3.7V 2600mAh Battery. Buy cheap Datalogic NBL3600 Replacement Battery from batteriestore.co.uk now. We have a strict testing process to ensure that your ordered products (like this battery for Datalogic NBL3600) are functionally correct before they are packed and sent to you. And before placing an order please make sure that your old original Datalogic NBL3600 battery’s shape is same to our batteries’ images as below. Free shipping and one year warranty!

Datalogic NBL3600 3.7V 2600mAh Replacement Battery

Product Description:

Type :Li-ion Polymer
Brand : Datalogic
Voltage : 3.7V
Capacity :2600mAh

TOP REASONS TO BUY FROM US

✔ Quality replacement battery with high Capacity
✔ Longer lifespan – thanks to modern Lithium technology without memory effect.
✔ Guaranteed safety: Protected against Short-circuits, Overheating and Overvoltage
✔ Each cell is separately tested in order to ensure professional standards are met.
✔ 100% compatible in replacing your original battery

Compatible Part Numbers:

NBL3600

Compatibile con i seguenti apparecchi :

Datalogic HD60

How to care for your NBL3600 battery.

This is the Replacement Datalogic NBL3600 Battery, You can extend the life of your NBL3600 battery significantly through the proper care and handling of your battery.

  • Any new NBL3600 battery should first be fully charged by leaving it plugged in overnight. Once a computer battery is fully charged it will no longer accept any more power. It is a common practice to leave Scanners plugged in after they have been turned off so that the battery has a full charge the next time you use your Scanner. It is probably fully charged within 5 hours.
  • A brand new NBL3600 Scanner battery is in a weakened condition since it has not been conditioned yet. Condition and break in your new battery by performing 5 partial discharge and recharge cycles the first week you receive your new battery.
  • Run on battery power without the AC adapter cord at least once a week to keep the NBL3600 battery cells active and at their peak potential. When your Scanner is plugged into the power adapter the battery goes to ‘standby mode’ while your Scanner runs directly on electricity from the wall outlet.
  • Even though your battery indicates it is fully charged, your battery will return to a weakened state again in a few months if it does not get some exercise through partial discharge and recharge cycles while running on battery power alone.
  • If your NBL3600 battery has not been actively used 2 months or more, condition your battery again with 5 partial discharge & recharge cycles to increase the batteries capacity and run time.
  • Don’t run your battery all the way to empty. Your battery will have a longer service life if it receives shallow discharge and recharge cycles. Research has shown that the useful life of the battery will be much longer if you begin to recharge the battery any time before reaching 20% of the remaining power capacity. Recharging the NBL3600 battery even after 10 minutes will not reduce the battery’s life span as lithium batteries do not have the memory effect which was found in older NiCad battery technology. NiCad batteries have never been used in Scanners, even the earliest models.
  • Never run your battery below the 2% critically low warning point. If your battery is run below this point it may not have enough energy to even recharge. This may effectively ‘kill’ your NBL3600 battery.

How can I extend your battery run time?

You can extend your NBL3600 battery run time by minimizing the power drain on your battery. A 3 cell battery will run approximately 2 to 2-1/2 hours when the battery is new. Even longer times can be achieved by minimizing the power consumption of your laptop. Here are the top ways to reduce your power consumption.

  • Avoid using the CD or DVD drive as the motor consumes a fair amount of power.
  • Turn off your wireless finder if you are not using the internet.
  • Remove any devices plugged into your USB ports or other ports.
  • Close out programs you are not using. By minimizing the load on your CPU, sometimes you can avoid having the cooling fan turn to its high speed mode.
  • Increase your memory to 4 Gigabytes. This creates less work for your hard drive. Data is temporarily written to your hard drive when your memory is not sufficient to hold all the data on the many pages you may be accessing.
  • Reduce the brightness of your laptop screen. This is the number one drain on your battery by far.

Prodotti popolari

Datalogic RBP-GM40 3.7V 2100mAh Replacement Battery for Datalogic GM4400 GM4100 GBT4400 4100

This is a rechargeable Datalogic 3.7V 2100mAh RBP-GM40 Battery . High quality and long lifetime, this RBP-GM40 battery lets you work seamlessly when you are on the move for business trips or vacations. All our Li-ion replacement batteries for Datalogic RBP-GM40 Scanner have been tested and proven to match and/or exceed original battery performance and are 100% compatible with Original Manufacturer Specifications. Every piece of our replacement battery for Datalogic RBP-GM40 has been tested and validated on Datalogic systems to ensure the safety for your Datalogic GM4400 GM4100 GBT4400 4100. Increased capacity extends your workable hours at the office, in meetings or classes, or while traveling.

RBP-GM40 Replacement Datalogic RBP-GM40 3.7V 2100mAh Battery. Buy cheap Datalogic RBP-GM40 Replacement Battery from batteriestore.co.uk now. We have a strict testing process to ensure that your ordered products (like this battery for Datalogic RBP-GM40) are functionally correct before they are packed and sent to you. And before placing an order please make sure that your old original Datalogic RBP-GM40 battery’s shape is same to our batteries’ images as below. Free shipping and one year warranty!

Datalogic RBP-GM40 3.7V 2100mAh Replacement Battery

Product Description:

Type :Li-ion
Brand : Datalogic
Voltage : 3.7V
Capacity :2100mAh

TOP REASONS TO BUY FROM US

✔ Quality replacement battery with high Capacity
✔ Longer lifespan – thanks to modern Lithium technology without memory effect.
✔ Guaranteed safety: Protected against Short-circuits, Overheating and Overvoltage
✔ Each cell is separately tested in order to ensure professional standards are met.
✔ 100% compatible in replacing your original battery

Compatible Part Numbers:

RBP-GM40

Compatibile con i seguenti apparecchi :

Datalogic GM4400 GM4100 GBT4400 4100

How to care for your RBP-GM40 battery.

This is the Replacement Datalogic RBP-GM40 Battery, You can extend the life of your RBP-GM40 battery significantly through the proper care and handling of your battery.

  • Any new RBP-GM40 battery should first be fully charged by leaving it plugged in overnight. Once a computer battery is fully charged it will no longer accept any more power. It is a common practice to leave Scanners plugged in after they have been turned off so that the battery has a full charge the next time you use your Scanner. It is probably fully charged within 5 hours.
  • A brand new RBP-GM40 Scanner battery is in a weakened condition since it has not been conditioned yet. Condition and break in your new battery by performing 5 partial discharge and recharge cycles the first week you receive your new battery.
  • Run on battery power without the AC adapter cord at least once a week to keep the RBP-GM40 battery cells active and at their peak potential. When your Scanner is plugged into the power adapter the battery goes to ‘standby mode’ while your Scanner runs directly on electricity from the wall outlet.
  • Even though your battery indicates it is fully charged, your battery will return to a weakened state again in a few months if it does not get some exercise through partial discharge and recharge cycles while running on battery power alone.
  • If your RBP-GM40 battery has not been actively used 2 months or more, condition your battery again with 5 partial discharge & recharge cycles to increase the batteries capacity and run time.
  • Don’t run your battery all the way to empty. Your battery will have a longer service life if it receives shallow discharge and recharge cycles. Research has shown that the useful life of the battery will be much longer if you begin to recharge the battery any time before reaching 20% of the remaining power capacity. Recharging the RBP-GM40 battery even after 10 minutes will not reduce the battery’s life span as lithium batteries do not have the memory effect which was found in older NiCad battery technology. NiCad batteries have never been used in Scanners, even the earliest models.
  • Never run your battery below the 2% critically low warning point. If your battery is run below this point it may not have enough energy to even recharge. This may effectively ‘kill’ your RBP-GM40 battery.

How can I extend your battery run time?

You can extend your RBP-GM40 battery run time by minimizing the power drain on your battery. A 3 cell battery will run approximately 2 to 2-1/2 hours when the battery is new. Even longer times can be achieved by minimizing the power consumption of your laptop. Here are the top ways to reduce your power consumption.

  • Avoid using the CD or DVD drive as the motor consumes a fair amount of power.
  • Turn off your wireless finder if you are not using the internet.
  • Remove any devices plugged into your USB ports or other ports.
  • Close out programs you are not using. By minimizing the load on your CPU, sometimes you can avoid having the cooling fan turn to its high speed mode.
  • Increase your memory to 4 Gigabytes. This creates less work for your hard drive. Data is temporarily written to your hard drive when your memory is not sufficient to hold all the data on the many pages you may be accessing.
  • Reduce the brightness of your laptop screen. This is the number one drain on your battery by far.

Prodotti popolari

Datalogic memor-X3 3.7V 8.51Wh Replacement Battery for Datalogic CVR2

This is a rechargeable Datalogic 3.7V 8.51Wh memor-X3 Battery . High quality and long lifetime, this memor-X3 battery lets you work seamlessly when you are on the move for business trips or vacations. All our Li-ion replacement batteries for Datalogic memor-X3 Scanner have been tested and proven to match and/or exceed original battery performance and are 100% compatible with Original Manufacturer Specifications. Every piece of our replacement battery for Datalogic memor-X3 has been tested and validated on Datalogic systems to ensure the safety for your Datalogic CVR2. Increased capacity extends your workable hours at the office, in meetings or classes, or while traveling.

memor-X3 Replacement Datalogic memor-X3 3.7V 8.51Wh Battery. Buy cheap Datalogic memor-X3 Replacement Battery from batteriestore.co.uk now. We have a strict testing process to ensure that your ordered products (like this battery for Datalogic memor-X3) are functionally correct before they are packed and sent to you. And before placing an order please make sure that your old original Datalogic memor-X3 battery’s shape is same to our batteries’ images as below. Free shipping and one year warranty!

Datalogic memor-X3 3.7V 8.51Wh Replacement Battery

Product Description:

Type :Li-ion
Brand : Datalogic
Voltage : 3.7V
Capacity :8.51Wh

TOP REASONS TO BUY FROM US

✔ Quality replacement battery with high Capacity
✔ Longer lifespan – thanks to modern Lithium technology without memory effect.
✔ Guaranteed safety: Protected against Short-circuits, Overheating and Overvoltage
✔ Each cell is separately tested in order to ensure professional standards are met.
✔ 100% compatible in replacing your original battery

Compatible Part Numbers:

memor-X3

3H21-00000383

Compatibile con i seguenti apparecchi :

Datalogic CVR2

How to care for your memor-X3 battery.

This is the Replacement Datalogic memor-X3 Battery, You can extend the life of your memor-X3 battery significantly through the proper care and handling of your battery.

  • Any new memor-X3 battery should first be fully charged by leaving it plugged in overnight. Once a computer battery is fully charged it will no longer accept any more power. It is a common practice to leave Scanners plugged in after they have been turned off so that the battery has a full charge the next time you use your Scanner. It is probably fully charged within 5 hours.
  • A brand new memor-X3 Scanner battery is in a weakened condition since it has not been conditioned yet. Condition and break in your new battery by performing 5 partial discharge and recharge cycles the first week you receive your new battery.
  • Run on battery power without the AC adapter cord at least once a week to keep the memor-X3 battery cells active and at their peak potential. When your Scanner is plugged into the power adapter the battery goes to ‘standby mode’ while your Scanner runs directly on electricity from the wall outlet.
  • Even though your battery indicates it is fully charged, your battery will return to a weakened state again in a few months if it does not get some exercise through partial discharge and recharge cycles while running on battery power alone.
  • If your memor-X3 battery has not been actively used 2 months or more, condition your battery again with 5 partial discharge & recharge cycles to increase the batteries capacity and run time.
  • Don’t run your battery all the way to empty. Your battery will have a longer service life if it receives shallow discharge and recharge cycles. Research has shown that the useful life of the battery will be much longer if you begin to recharge the battery any time before reaching 20% of the remaining power capacity. Recharging the memor-X3 battery even after 10 minutes will not reduce the battery’s life span as lithium batteries do not have the memory effect which was found in older NiCad battery technology. NiCad batteries have never been used in Scanners, even the earliest models.
  • Never run your battery below the 2% critically low warning point. If your battery is run below this point it may not have enough energy to even recharge. This may effectively ‘kill’ your memor-X3 battery.

How can I extend your battery run time?

You can extend your memor-X3 battery run time by minimizing the power drain on your battery. A 3 cell battery will run approximately 2 to 2-1/2 hours when the battery is new. Even longer times can be achieved by minimizing the power consumption of your laptop. Here are the top ways to reduce your power consumption.

  • Avoid using the CD or DVD drive as the motor consumes a fair amount of power.
  • Turn off your wireless finder if you are not using the internet.
  • Remove any devices plugged into your USB ports or other ports.
  • Close out programs you are not using. By minimizing the load on your CPU, sometimes you can avoid having the cooling fan turn to its high speed mode.
  • Increase your memory to 4 Gigabytes. This creates less work for your hard drive. Data is temporarily written to your hard drive when your memory is not sufficient to hold all the data on the many pages you may be accessing.
  • Reduce the brightness of your laptop screen. This is the number one drain on your battery by far.

Prodotti popolari

Datalogic BT-0016J 3.63V 5100mAh Replacement Battery for Datalogic Skorpio X3

This is a rechargeable Datalogic 3.63V 5100mAh BT-0016J Battery . High quality and long lifetime, this BT-0016J battery lets you work seamlessly when you are on the move for business trips or vacations. All our Li-ion replacement batteries for Datalogic BT-0016J Scanner have been tested and proven to match and/or exceed original battery performance and are 100% compatible with Original Manufacturer Specifications. Every piece of our replacement battery for Datalogic BT-0016J has been tested and validated on Datalogic systems to ensure the safety for your Datalogic Skorpio X3. Increased capacity extends your workable hours at the office, in meetings or classes, or while traveling.

BT-0016J Replacement Datalogic BT-0016J 3.63V 5100mAh Battery. Buy cheap Datalogic BT-0016J Replacement Battery from batteriestore.co.uk now. We have a strict testing process to ensure that your ordered products (like this battery for Datalogic BT-0016J) are functionally correct before they are packed and sent to you. And before placing an order please make sure that your old original Datalogic BT-0016J battery’s shape is same to our batteries’ images as below. Free shipping and one year warranty!

Datalogic BT-0016J 3.63V 5100mAh Replacement Battery

Product Description:

Type :Li-ion
Brand : Datalogic
Voltage : 3.63V
Capacity :5100mAh

TOP REASONS TO BUY FROM US

✔ Quality replacement battery with high Capacity
✔ Longer lifespan – thanks to modern Lithium technology without memory effect.
✔ Guaranteed safety: Protected against Short-circuits, Overheating and Overvoltage
✔ Each cell is separately tested in order to ensure professional standards are met.
✔ 100% compatible in replacing your original battery

Compatible Part Numbers:

BT-0016J

Compatibile con i seguenti apparecchi :

Datalogic Skorpio X3

How to care for your BT-0016J battery.

This is the Replacement Datalogic BT-0016J Battery, You can extend the life of your BT-0016J battery significantly through the proper care and handling of your battery.

  • Any new BT-0016J battery should first be fully charged by leaving it plugged in overnight. Once a computer battery is fully charged it will no longer accept any more power. It is a common practice to leave Scanners plugged in after they have been turned off so that the battery has a full charge the next time you use your Scanner. It is probably fully charged within 5 hours.
  • A brand new BT-0016J Scanner battery is in a weakened condition since it has not been conditioned yet. Condition and break in your new battery by performing 5 partial discharge and recharge cycles the first week you receive your new battery.
  • Run on battery power without the AC adapter cord at least once a week to keep the BT-0016J battery cells active and at their peak potential. When your Scanner is plugged into the power adapter the battery goes to ‘standby mode’ while your Scanner runs directly on electricity from the wall outlet.
  • Even though your battery indicates it is fully charged, your battery will return to a weakened state again in a few months if it does not get some exercise through partial discharge and recharge cycles while running on battery power alone.
  • If your BT-0016J battery has not been actively used 2 months or more, condition your battery again with 5 partial discharge & recharge cycles to increase the batteries capacity and run time.
  • Don’t run your battery all the way to empty. Your battery will have a longer service life if it receives shallow discharge and recharge cycles. Research has shown that the useful life of the battery will be much longer if you begin to recharge the battery any time before reaching 20% of the remaining power capacity. Recharging the BT-0016J battery even after 10 minutes will not reduce the battery’s life span as lithium batteries do not have the memory effect which was found in older NiCad battery technology. NiCad batteries have never been used in Scanners, even the earliest models.
  • Never run your battery below the 2% critically low warning point. If your battery is run below this point it may not have enough energy to even recharge. This may effectively ‘kill’ your BT-0016J battery.

How can I extend your battery run time?

You can extend your BT-0016J battery run time by minimizing the power drain on your battery. A 3 cell battery will run approximately 2 to 2-1/2 hours when the battery is new. Even longer times can be achieved by minimizing the power consumption of your laptop. Here are the top ways to reduce your power consumption.

  • Avoid using the CD or DVD drive as the motor consumes a fair amount of power.
  • Turn off your wireless finder if you are not using the internet.
  • Remove any devices plugged into your USB ports or other ports.
  • Close out programs you are not using. By minimizing the load on your CPU, sometimes you can avoid having the cooling fan turn to its high speed mode.
  • Increase your memory to 4 Gigabytes. This creates less work for your hard drive. Data is temporarily written to your hard drive when your memory is not sufficient to hold all the data on the many pages you may be accessing.
  • Reduce the brightness of your laptop screen. This is the number one drain on your battery by far.

Prodotti popolari

Datalogic memor-X3 3.7V 5.29Wh Replacement Battery for Datalogic CVR2

This is a rechargeable Datalogic 3.7V 5.29Wh memor-X3 Battery . High quality and long lifetime, this memor-X3 battery lets you work seamlessly when you are on the move for business trips or vacations. All our Li-ion replacement batteries for Datalogic memor-X3 Scanner have been tested and proven to match and/or exceed original battery performance and are 100% compatible with Original Manufacturer Specifications. Every piece of our replacement battery for Datalogic memor-X3 has been tested and validated on Datalogic systems to ensure the safety for your Datalogic CVR2. Increased capacity extends your workable hours at the office, in meetings or classes, or while traveling.

memor-X3 Replacement Datalogic memor-X3 3.7V 5.29Wh Battery. Buy cheap Datalogic memor-X3 Replacement Battery from batteriestore.co.uk now. We have a strict testing process to ensure that your ordered products (like this battery for Datalogic memor-X3) are functionally correct before they are packed and sent to you. And before placing an order please make sure that your old original Datalogic memor-X3 battery’s shape is same to our batteries’ images as below. Free shipping and one year warranty!

Datalogic memor-X3 3.7V 5.29Wh Replacement Battery

Product Description:

Type :Li-ion
Brand : Datalogic
Voltage : 3.7V
Capacity :5.29Wh

TOP REASONS TO BUY FROM US

✔ Quality replacement battery with high Capacity
✔ Longer lifespan – thanks to modern Lithium technology without memory effect.
✔ Guaranteed safety: Protected against Short-circuits, Overheating and Overvoltage
✔ Each cell is separately tested in order to ensure professional standards are met.
✔ 100% compatible in replacing your original battery

Compatible Part Numbers:

memor-X3

Compatibile con i seguenti apparecchi :

Datalogic CVR2

How to care for your memor-X3 battery.

This is the Replacement Datalogic memor-X3 Battery, You can extend the life of your memor-X3 battery significantly through the proper care and handling of your battery.

  • Any new memor-X3 battery should first be fully charged by leaving it plugged in overnight. Once a computer battery is fully charged it will no longer accept any more power. It is a common practice to leave Scanners plugged in after they have been turned off so that the battery has a full charge the next time you use your Scanner. It is probably fully charged within 5 hours.
  • A brand new memor-X3 Scanner battery is in a weakened condition since it has not been conditioned yet. Condition and break in your new battery by performing 5 partial discharge and recharge cycles the first week you receive your new battery.
  • Run on battery power without the AC adapter cord at least once a week to keep the memor-X3 battery cells active and at their peak potential. When your Scanner is plugged into the power adapter the battery goes to ‘standby mode’ while your Scanner runs directly on electricity from the wall outlet.
  • Even though your battery indicates it is fully charged, your battery will return to a weakened state again in a few months if it does not get some exercise through partial discharge and recharge cycles while running on battery power alone.
  • If your memor-X3 battery has not been actively used 2 months or more, condition your battery again with 5 partial discharge & recharge cycles to increase the batteries capacity and run time.
  • Don’t run your battery all the way to empty. Your battery will have a longer service life if it receives shallow discharge and recharge cycles. Research has shown that the useful life of the battery will be much longer if you begin to recharge the battery any time before reaching 20% of the remaining power capacity. Recharging the memor-X3 battery even after 10 minutes will not reduce the battery’s life span as lithium batteries do not have the memory effect which was found in older NiCad battery technology. NiCad batteries have never been used in Scanners, even the earliest models.
  • Never run your battery below the 2% critically low warning point. If your battery is run below this point it may not have enough energy to even recharge. This may effectively ‘kill’ your memor-X3 battery.

How can I extend your battery run time?

You can extend your memor-X3 battery run time by minimizing the power drain on your battery. A 3 cell battery will run approximately 2 to 2-1/2 hours when the battery is new. Even longer times can be achieved by minimizing the power consumption of your laptop. Here are the top ways to reduce your power consumption.

  • Avoid using the CD or DVD drive as the motor consumes a fair amount of power.
  • Turn off your wireless finder if you are not using the internet.
  • Remove any devices plugged into your USB ports or other ports.
  • Close out programs you are not using. By minimizing the load on your CPU, sometimes you can avoid having the cooling fan turn to its high speed mode.
  • Increase your memory to 4 Gigabytes. This creates less work for your hard drive. Data is temporarily written to your hard drive when your memory is not sufficient to hold all the data on the many pages you may be accessing.
  • Reduce the brightness of your laptop screen. This is the number one drain on your battery by far.

Prodotti popolari