Canon BP-718 3.6V 1790mAh/6.4WH Replacement Battery for Canon VIXIA HF M50 M52 500 M56 M506HF R30 R30032 R36 R38 R306

This is a rechargeable Canon 3.6V 1790mAh/6.4WH BP-718 Battery . High quality and long lifetime, this BP-718 battery lets you work seamlessly when you are on the move for business trips or vacations. All our Li-ion replacement batteries for Canon BP-718 Camera have been tested and proven to match and/or exceed original battery performance and are 100% compatible with Original Manufacturer Specifications. Every piece of our replacement battery for Canon BP-718 has been tested and validated on Canon systems to ensure the safety for your Canon VIXIA HF M50 M52 500 M56 M506HF R30 R30032 R36 R38 R306. Increased capacity extends your workable hours at the office, in meetings or classes, or while traveling.

BP-718 Replacement Canon BP-718 3.6V 1790mAh/6.4WH Battery. Buy cheap Canon BP-718 Replacement Battery from batteriestore.co.uk now. We have a strict testing process to ensure that your ordered products (like this battery for Canon BP-718) are functionally correct before they are packed and sent to you. And before placing an order please make sure that your old original Canon BP-718 battery's shape is same to our batteries' images as below. Free shipping and one year warranty!

Product Description:

Type :Li-ion
Brand : Canon
Voltage : 3.6V
Capacity :1790mAh/6.4WH

TOP REASONS TO BUY FROM US

✔ Quality replacement battery with high Capacity
✔ Longer lifespan - thanks to modern Lithium technology without memory effect.
✔ Guaranteed safety: Protected against Short-circuits, Overheating and Overvoltage
✔ Each cell is separately tested in order to ensure professional standards are met.
✔ 100% compatible in replacing your original battery

Compatible Part Numbers:

BP-718

Compatibile con i seguenti apparecchi :

Canon VIXIA HF M50 M52 500 M56 M506HF R30 R30032 R36 R38 R306 Camcorder

How to care for your BP-718 battery.

This is the Replacement Canon BP-718 Battery, You can extend the life of your BP-718 battery significantly through the proper care and handling of your battery.

Any new BP-718 battery should first be fully charged by leaving it plugged in overnight. Once a computer battery is fully charged it will no longer accept any more power. It is a common practice to leave Cameras plugged in after they have been turned off so that the battery has a full charge the next time you use your Camera. It is probably fully charged within 5 hours.
A brand new BP-718 Camera battery is in a weakened condition since it has not been conditioned yet. Condition and break in your new battery by performing 5 partial discharge and recharge cycles the first week you receive your new battery.
Run on battery power without the AC adapter cord at least once a week to keep the BP-718 battery cells active and at their peak potential. When your Camera is plugged into the power adapter the battery goes to 'standby mode' while your Camera runs directly on electricity from the wall outlet.
Even though your battery indicates it is fully charged, your battery will return to a weakened state again in a few months if it does not get some exercise through partial discharge and recharge cycles while running on battery power alone.
If your BP-718 battery has not been actively used 2 months or more, condition your battery again with 5 partial discharge & recharge cycles to increase the batteries capacity and run time.
Don't run your battery all the way to empty. Your battery will have a longer service life if it receives shallow discharge and recharge cycles. Research has shown that the useful life of the battery will be much longer if you begin to recharge the battery any time before reaching 20% of the remaining power capacity. Recharging the BP-718 battery even after 10 minutes will not reduce the battery's life span as lithium batteries do not have the memory effect which was found in older NiCad battery technology. NiCad batteries have never been used in Cameras, even the earliest models.
Never run your battery below the 2% critically low warning point. If your battery is run below this point it may not have enough energy to even recharge. This may effectively 'kill' your BP-718 battery.

How can I extend your battery run time?

You can extend your BP-718 battery run time by minimizing the power drain on your battery. A 3 cell battery will run approximately 2 to 2-1/2 hours when the battery is new. Even longer times can be achieved by minimizing the power consumption of your laptop. Here are the top ways to reduce your power consumption.

Avoid using the CD or DVD drive as the motor consumes a fair amount of power.
Turn off your wireless finder if you are not using the internet.
Remove any devices plugged into your USB ports or other ports.
Close out programs you are not using. By minimizing the load on your CPU, sometimes you can avoid having the cooling fan turn to its high speed mode.
Increase your memory to 4 Gigabytes. This creates less work for your hard drive. Data is temporarily written to your hard drive when your memory is not sufficient to hold all the data on the many pages you may be accessing.
Reduce the brightness of your laptop screen. This is the number one drain on your battery by far.